Product name: corrugated ribs belt conveyor

B=650mm、Q=70t/h、V=1m/s、倾角α=40°、L=420m。

Parameters: B=650mm、Q=70t/h、V=1m/s、Inclination angle α=40°、L=420m。

Product introduction: the drive theory of corrugated ribs is same as common belt conveyor, they are all use belt as haulage and loading parts for continuous conveying equipment. The different is the corrugated ribs, it could turning the material from horizontal to any angle in a extreme short distance, include 90°lifting, it is the ideal product for large inclination conveying and vertical lifting.

Detail contents:

1、It uses corrugated ribs belt, all the relevant parts are use this.

2、Because there are horizontal inner bar on the belt, so it has to use relevant method for loading, to avoid the hit between material and inner bar.

3、When the running direction is changing, it has to install necessary belt guide device, and install belt pressing roller at concave line (include loading branch and returning branch)

4、Set belt swing limitation parts which similar to regular belt conveyor at return branch, usually could directly use roller, when the gravity of subject is too big should consider the ribs’ strength, set for special roller.

5、Large inclination corrugated ribs belt conveyor combined with bucket conveyor, embedded scarper conveyor, common belt conveyor advantages, and eliminate the disadvantages of these conveyors, could conveying material from 0~90° range.

6、To achieve better inlet and outlet condition of belt conveyor, it uses vertical s-shape layout, include upper level section, lower level section and vertical section.

Classic products of corrugated ribs belt conveyor